Lab Search. Simplified.
Send your testing and calibration requirement for quick response
Simple
Correct
Trusted
Yadav Measurements Private Limited
Plot No. 373-375, RIICO Bhamashah Industrial Area, Kaladwas,, Udaipur, Rajasthan, India,
0294-2650127-128
yadav.measurements@ymllabs.com
Other Branches:
Yadav Measurements Private Limited , Telangana- BIS
Also Listed In
Discipline
- #NAME?
- Abnormal A.C. Magnetic Induction Of External Origin (10mTesla)
- Abnormal A.C.Magnetic Induction Of External Origin (200 mTesla)
- Abnormal Ac Magnetic Induction Of External Origin Test
- Abnormal operation clause 27
- Ac Voltage Test
- Accuracy Limit Factor
- Actions Clause 11.4
- Actuating member and actuating means Clause 18.9
- Actuating members and actuating means Clause 8.2
- Actuation and operation clause 11.3
- Additional-Functionalities
- Adequacy of earth connections clause 9.3
- Adequate Protection Against Accidental Contact With Clause 8.1
- Adequate Protection Against Accidental Contact With Test
- ageing test clause 17.6
- All Application Associations With Specified Services Test
- All circuits and terminals intended to control external loads shall be loaded as declared in table 1, requirement 3 clause 14.4
- All Circuits And Terminals Intended To Control External Loads Shall Be Loaded As Declared In Table 1, Requirements 3 Clause 14.4
- All Data Types Test
- All Mandatory Parameters Test
- Ambient Temperature Influence Test
- Ambient Temperature Infuence
- Annex U is not applicable to relays use as Components in a control Clause 24.3
- Association Objects With Access Rights And OBIS Codes
- Association Objects With Access Rights And Obis Codes Test
- Attachment of cords clause 11.7
- Auxillary Voltage
- Backup Power Supply Replacement
- Capacitors Clause 8.3
- Class II and class III controls shall have no provision for protective earthing clause 9.2
- Clearances Clause 20.1
- Cold Test
- compliance is checked by the appropriate tests of this clause 15.2
- Compliance Is Checked By The Appropriate Tests Of This Clause Clause 15.2
- Components Clause 24
- Components other than those detailed in 24.1 are checked when carrying out the test of this standard clause 24.2
- Components Other Than Those Detailed In 24.1 Are Checked When Carrying Out The Tests Of This Standard Clause 24.2
- Composite Error Measurement Test
- Conformance To Protocol Implementation As Per Dlms Cosem Base Standards; Iec 62056 Test
- Conformance To Protocol Implementation As Per DLMS/COSEM Base Standards; IEC 62056
- Conformance To Protocol Implementation Of Specific Requirements Related To :
- Constructional requirements clause 11
- Continuous Abnormal Magnetic Induction Of External Origin
- Continuous Abnormal Test
- Continuous Excessive Inputs
- Continuous Excessive Inputs Test
- Continuous Magnetic Induction Of External Origin
- Continuous Magnetic Induction Of External Origin Test
- Controls and their supporting surfaces shall not attain excessive temperatures in normal use clause 14.1
- Controls are tested in an appropriate heating and/ or refrigerating apparatus such that the conditions in 14.5.1 and 14.5.2
- Controls Are Tested In An Appropriate Heating And/Or Refrigerating Apparatus Such That The Conditions In 14.5.1 And 14.5.2
- Controls Which Are Sensitive To The Environmental Stress Of Temperature Clause 16.1
- Core Functional Test Within Voltage And Temperature Range Limits
- Core Functional Test Within Voltage And Temperature Range Limits Test
- Corrosion Resistance Clause 9.4
- Corrosion resistance Clause 9.5
- Covers and uninsulated live or hazardous parts Clause 8.4
- Covers And Uninsulated Live Or Hazardous Parts Clause 8.4
- Creepage distances clause 20.2
- Creepage distances, clearances and distances through solid insulation clause 20
- Current Circuit Test
- Current- carrying connections clause 19.2
- Current-Carrying Connections Clause 19.2
- Damp Heat Cyclic Test
- Damped Oscillatory Wave Immunity Test
- Damped Oscillatory Waves Immunity Test On Power Port Test
- DC And Even Harmonics In AC Current Circuit
- Dc And Even Harmonics In Ac Test
- Determination Of Error According To Requirement Of Appropriate Accuracy Class
- Determination Of Error According To Requirement Of Appropriate Accuracy Class Testing
- Dielectric strength requirements clause 17.5
- Drop And Topple
- Drop And Topple Test
- Dry Heat Test
- Dry Heat Test, Cold Test
- Durability
- Durability Test
- Electric strength and insulation resistance clause 13
- Electric strength clause 13.2
- Electrical conditions for the tests clause 17.2
- Electrical Fast Transient Burst Test
- Electromagnetic Compatibility Test
- Electromagnetic Compatibilty Test
- Electrostatic Discharge Immunity Test
- Electrostatic Discharge Immunity Test (Esd)
- Endurance clause 17
- Environment Condition test
- Environmental Conditional Test
- Environmental stress clause 16
- Environmental Stress Of Temperature Clause 16.2
- Equipment inlets and socket-outlets clause 11.10
- Events Related To DLMS Objects With Event Identifiers
- Events Related To Dlms Objects With Event Identifiers Test
- Excessive Inputs Of Short Duration
- Excessive Inputs Of Short Duration Test
- Foot actuated controls clause 18.8
- For controls being completely or partially destroyed during normal operation clause 15.3
- For Controls Being completely Or Partially Destroyed During Normal Operation: Appropriate Tests Of Clause 17 Are Sufficient Clause 15.3
- For Controls That Are Neither Integrated Nor Incorporated
- For Controls That Are Neither Integrated Nor Incorporated Test
- Free- standing controls clause 18.5
- Free-Standing Controls Clause 18.5
- Frequency Influence error In The Case Of AC Voltage Measurement
- Frequency Influence Error In The Case Of Ac Voltage Measurement Test
- Frequency Variation Test
- Functional Performance
- Functional Performance Test
- Functional Requirement
- Functional Requirements And Tests-Accuracy:
- Functional Requirements Test
- Functional Tests Within The Limit Range Of The Operation With Temperature
- Functional Tests Within The Limit Range Of The Operation With Voltage
- Functional Tests Within The Limit Range Of The Operation With Voltage Test
- General
- General And Constructional Requirements Test
- General requirements clause 17.1
- General requirements clause 18.1
- General requirements Clause 21.1
- General Requirements Clause 7.1
- General Requirements Clause 7.1 Test
- General requirements Clause 9.1
- Guidance on the use of electronics disconnection Clause 27.5
- Harmonic Component In Current And Voltage Circuit
- Harmonics Component In Current And Voltage Circuit Test
- Heat Deflection Test
- Heating clause 14
- High Frequency Disturbance Test
- High Voltage Power Frequency Test
- High Voltage Power Frequency Test (Dry And Wet) Testing
- Higher Order Harmonic Test
- Immunity To AC Magnetic Fields
- Immunity To Conducted Disturbances, Induced By Radio Frequency Field (Conducted Susceptibility) Test
- Immunity To DC Magnetic Fields
- Immunity To Earth Fault Test /Abnormal Voltage Condition
- Immunity To Earth Fault Test Abnormal Voltage Condition Test
- Immunity To Earth Fault Test/ Abnormal Voltage Condition
- Immunity To Electromagnetic Hf Field Using Anechoic Chamber Test
- Immunity To Electromagnetic HF Field Using GTEM Cell
- Immunity To Electromagnetic Hf Field Using Gtem Cell Test
- Immunity To Electromagnetic HF Field Using GTEM Cell Using Anechoic Chamber
- Immunity To Electrostatic Discharges
- Immunity To Electrostatic Discharges Test
- Impact resistance clause 18.2
- Impulse Voltage Test
- In line cord controls are stood or rested on a dull black Painted plywood surface clause 14.3
- in line cord controls Clause 18.6
- In-Line Cord Controls Are Stood Or Rested On A Dull Black Painted Plywood Surface Clause 14.3
- In-Line Cord Controls Clause 18.6
- Independently mounted controls clause 21.3
- Influence Error Resulting From A Change In Position
- Influence Error Resulting From A Change In Position Test
- Influence Error Resulting From Change In Ambient Temperature
- Influence Error Resulting From Change In Ambient Temperature Test
- Influence Error Resulting From Change In Relative Air Humidity
- Influence Error Resulting From Change In Relative Air Humidity Test
- Influence Error Resulting From Supply Voltage
- Influence Error Resulting From Supply Voltage Test
- Influence Heating Test
- Influence Of Heating
- Influence Of Self Heating
- Influence Of Self Heating Test
- Information Shall Be Provided Using One Or More Of The Following Methods Clause 7.2.2
- Information Shall Be Provided Using One Or More Of The Following Methods Clause 7.2.2 Test
- Inlet openings clause 11.9
- Instrument Security Current Test
- Instrument Security Factor
- insulation resistance clause 13.1
- Insulation Resistance Test
- Integrated Control Forming Part Of A More Complex Control Clause 7.2.4
- Integrated Control Forming Part Of A More Complex Control Clause 7.2.4 Test
- Integrated Controls All Information Is Provided By Means Of Declaration (X) Clause 7.2.6
- Integrated Controls All Information Is Provided By Means Of Declaration (X) Clause 7.2.6 Test
- Integrated, Incorporated And In-Line Cord Controls Clause 21.2
- Integrated, incorporated and inline cord controls clause 21.2
- Interpretation Of Test Results And Adjustment
- Interpretation Of Test Results And Adjustments Test
- Intrinsic Error
- Intrinsic Error Test
- Keypad Interfac Test
- Keypad Interface
- Limiting Conditions for Storage And Transport
- Limiting Value Of Output
- Limiting Value Of Output Test
- Limits Of Errors
- Limits Of Errors (Accuracy Requirements)
- Limits Of Errors Test
- Locked mechanism test clause 27.2
- Long Interruptions Of Supply Voltage
- Magnetic Induction Of External Origin
- Magnetic Induction Of External Origin Test
- Magnetic Induction Of External Origin. Test
- Mannual and mechanical conditions for the tests clause 17.4
- Manual And Mechanical Conditions For The Tests Clause 17.4
- Manufacturing deviation and drift clause 15
- Marking Of Meters
- Marking Test
- Materials Clause 11.1
- Measurement Of Knee Point Voltage
- Measurement Of Winding Resistance
- Measurement Of Winding Resistance Testing
- Mechanical Strength clause 18
- Meter Constant
- Meter Constant Test
- Methods of providing information Clause 7.2.1
- Methods Of Providing Information Clause 7.2.1 Test
- Moisture and dust resistance clause 12
- Mounting of control clause 11.5
- Mounting of control clause 11.6
- Mounting Of Controls Clause 11.5
- Mounting Of Controls Clause 11.6
- No Load Condition
- No Load Condition Test
- Normal operation clause 25
- Odd Harmonics In AC Current Circuit
- Odd Harmonics In Ac Current Circuit. Test
- On Power Port
- Operation Of Accessories. Test
- Operation Of An Accessories Test
- Operation Reserves
- Optical Characteristics
- Optical Characteristics Test
- Oscillatory Wave Immunity Test Ring Wave Test
- Other Requirements Clause 9.5
- Output Elements
- Over Range Of Measurand
- Over Range Of Measurand Test
- Over Voltage Interturn Test
- Over voltage test of manual action at accelerated speed clause 17.10
- Over-Voltage Inter-Turn Test
- Overload Test
- Overload test are carried out on in-line cord controls and plug and socket outlet clause 27.5
- Overvoltage and undervoltage test clause 27.3
- Overvoltage test of automatic action at accelerated rate clause 17.7
- Overvoltage Test Of Manual Action At Accelerated Speed Clause 17.10
- Performance Requirements For Payment Meters With Load Switching Utilization Categories UC1, UC2 & UC3
- Performance Requirements For Payment Meters With Load Switching Utilization Categories Uc1, Uc2 & Uc3 Test
- Permissible Excessive Inputs
- Permissible Excessive Inputs Test
- Phase Of Auxiliary Supply Changed By 120?
- Phase Of Auxiliary Supply Voltage By 120? Test
- Power Frequency Magnetic Field
- Power Frequency Magnetic Field Test
- Prepayment Mode- -Core Functionalities Test
- Prepayment Mode- Token Handling And Data Integrity Requirements
- Prepayment Mode-Core Functionalities
- Prepayment Mode-Token Handling And Data Integrity Requirements
- Protection Against Dust And Water
- Protection Against Dust And Water Test
- Protection against electric shock clause 11.2
- Protection Against Electric Shock Clause 8 Test
- Protection Against Electric Shock Test
- Protection against humid conditions clause 12.2
- Protection against ingress of water and dust clause 12.1
- Provision for protective earthing Clause 9
- Pull-Cord actuated controls clause 18.7
- Radio Interference Measurement
- Radio Interference Measurement (Ce) Test
- Radio Interference Measurements (Radiated Disturbance Power ) Test
- Rated Breaking Current
- Rated Breaking Voltage
- Repeatability Of Error Test
- Repeatability Of Errors Test
- Requirement For Declaration (X) Is Considered To Be Met Clause 7.2.5.1
- Requirement For Declaration (X) Is Considered To Be Met Clause 7.2.5.1 Test
- Requirement For Documentation (D) Is Considered To Be Met Clause 7.2.5
- Requirement For Documentation (D) Is Considered To Be Met Clause 7.2.5 Test
- Requirement For Documentation (D) Is Replaced By Declaration (X) Clause 7.2.3
- Requirement For Documentation (D) Is Replaced By Declaration (X) Clause 7.2.3 Test
- Requirement For Synchronous Time And Crystal Switches
- Requirement Of Time Keeping
- Requirements during mounting, maintenance and servicing clause 11.11
- Requirements Of Time-Keeping Test
- Resistance Against Ingress Of Solid Objects
- Resistance Of Insulating Material To Abnormal Heat And Fire
- Resistance to corrosion clause 22
- Resistance To Corrosion Clause 22
- Resistance To Heat And Fire
- Resistance To Heat And Fire Test
- Resistance to heat, fire and tracking Clause 21
- Resistance To Humid Conditions
- Resistance to rusting clause 22.1
- Response Time Test
- Reversed Phase Sequence
- Ripple Content Of Output
- Ripple Content Of Output Test
- Sealing Verification Test
- See Annex H Clause 27.1
- See Annex H Clause 27.4
- Self Heating Due To Measured Quantity
- Self Heating Due To Measured Quantity Test
- Shock Test
- Short Time Current Test
- Short Time Over Voltage Test
- size of chords- non-detachable Clause 11.8
- Size Of Cords ? Non-Detachable Clause 11.8
- solid insulation clause 20.3
- Spring Impact Hammer Test
- Spring/ Impact Hammer Test
- Spring/Impact Hammer Test
- Start Up Test Of Energy Meters
- Starting Condition Test
- Starting Conditions Test
- Step Response Time
- Step Response Time Test
- Stray A.C. Magnetic Induction Of External Origin
- Stray Ac Magnetic Induction Of External Origin Test
- Sub Harmonic In AC Current Circuit
- Sub Harmonics In A.C. Current Circuit Test
- Surge Immunity Test
- Surge Immunity Test (Power Ports)
- Surge Immunity Test On Power Port
- Switching Accuracy Test
- Synchronization Test
- System Compliance Requirements
- Tamper And Fraud Monitoring
- Tamper And Fraud Monitoring Test
- Temp. Test
- Temp.Rise Test
- Temperature of the medium in which the switch head is located, and the value of the activating quantity to which the sensing element is exposed clause 14.7
- Temperature Of The Medium In Which The Switch Head Is Located, And The Value Of The Activating Quantity To Which The Sensing Element Is Exposed Clause 14.7
- Temperature Rise Test
- Terminals and terminations clause 10
- Terminals and terminations for internal conductors Clause 10.2
- Terminals and terminations for external copper conductors clause 10.1
- Terminals and terminations for integrated conductors clause 10.3
- Terminals And Terminations For Internal Conductors Clause 10.2
- Terminals And Terminations Which Are Intended For The Connection Of External Conductors, Other Than Those For Non-Detachable Cords Using Attachment Methods M, Y Or Z Clause 14.2
- Terminals and terminations which are intended for the connection of external conductors, other than those for non-detachable cords using attachment methods M,Y or Z Clause 14.2
- Test For Limits Of Intrinsic Error
- Test For Temperature Rise
- Test of automatic action at accelerated rate clause 17.8
- Test of automatic action at slow rate clause 17.9
- Test Of Immunity To Conducted Disturbances
- Test Of Immunity To Conducted Disturbances Induced By Radio Frequency Field
- Test Of Immunity To Conducted Disturbances Induced By Radio Frequency Field On Power Port
- Test Of Immunity To Conducted Disturbances, Induced By Radio Frequency Fields (Single Phase And Three Phase As Per Cdn Method) (Power Ports) Test
- Test Of Influence Of Harmonics
- Test Of Influence Of Short Time Over Current Test
- Test Of Influence Quantities
- Test Of Manual Action At Accelerated Speed Clause 17.13
- Test of manual action at high speed clause 17.12
- Test of manual action at slow speed clause 17.11
- Test Of Mechanical And Electrical Characteristics
- Test Of Power Consumption Power Loss Test
- Test Of Power Consumption/Power Loss Test
- Test Of Synchronous & Crystal Controlled Time Switches
- Test Of Synchronous & Crystal Controlled Time Switches On Operation Reserve
- Test Of The Effects Of Short Supply Interruptions On Synchronous Time Switches
- Test Of Time Keeping Accuracy Of Crystal-Controlled Time Switches With Temperature
- Test On Time Switches With Dials
- Test On Time Switches With Digital Displays
- Tests Of Effect Of Voltage Dips And Short Interruptions
- The temperature specified for the switch head, the mounting surfaces and sensing element shall be attained in approx.1 h clause 14.6
- The Temperature Specified For The Switch Head, The Mounting Surfaces And Sensing Element Shall Be Attained In Approximately 1 H Clause 14.6
- Thermal conditions for the tests clause 17.3
- Those parts of controls providing a Type 2 action clause 15.1
- Threaded parts and connection contacts gaps clause 19
- Threaded Parts And Connections Contacts Gaps Clause 19
- Threaded parts moved during mounting or servicing clause 19.1
- Time Keeping Accuracy Test
- Time Setting And Programming
- Time Switches With Digital Displays
- Time Switches With Mechanical Analogue Dials
- Transformer supply power to a SELV- circuit or PELV-circuit shall be of the safety isolating type Clause 24.1
- Transformer Supply Power To A SELV-Circuit Or PELV-Circuit Shall Be Of The Safety Isolating Type Clause 24.1
- Variation Due To Ambient Temperature
- Variation Due To Ambient Test
- Variation Due To Auxiliary Supply Frequency
- Variation Due To Auxiliary Supply Frequency Test
- Variation Due To Auxiliary Supply Voltage
- Variation Due To Auxiliary Supply Voltage Test
- Variation Due To Common Mode Interference
- Variation Due To Common Mode Interference Test
- Variation Due To Series Mode Interference
- Variation Due To Series Mode Interference Test
- Variation Due To The Continuous Operation
- Variation Due To The Continuous Operation Test
- Variation Due To The Distortion Of The Input Quantity
- Variation Due To The Distortion Of The Input Quantity Test
- Variation Due To The Frequency Of The Input Quantity
- Variation Due To The Frequency Of The Input Quantity Test
- Variation Due To The Input Current
- Variation Due To The Input Current Test
- Variation Due To The Input Voltage
- Variation Due To The Input Voltage Test
- Variation Due To The Interaction Between Measuring Elements
- Variation Due To The Interaction Between Measuring Elements Test
- Variation Due To The Magnetic Field Of External Origin
- Variation Due To The Magnetic Field Of External Origin Test
- Variation Due To The Output Load
- Variation Due To The Output Load Test
- Variation due to the power factor
- Variation Due To The Power Factor Test
- Variation Due To The Self Heating
- Variation Due To The Self Heating Test
- Variation Due To The Supply Frequency
- Variation Due To The Unbalanced Current
- Variation Due To The Unbalanced Currents Test
- Verification Of Terminal Marking And Polarity
- Verification Of Terminal Marking And Polarity Testing
- Vibration Test
- Vibration Test, Shock Test
- Voltage Dips And Short Interruptions
- Voltage Test , Insulation Test And Other Safety Requirements
- Voltage Test/Insulation Test And Other Safety Requirements
- Voltage Unbalance Test
- Voltage Unbalance Test & Voltage Variation
- Voltage Variation Test
- Waveform: 10% Of 3rd Harmonics In The Current Circuit
Related Labs
Scope of Accrediation
Products
Accrediation valid upto
31-03-2021
About Yadav Measurements Private Limited
Yadav Measurements Private Limited is an accredited laboratory engaged in electro-technical calibration and electrical testing. Specializing in AC power and energy calibration and electricity meter testing, Yadav Measurements operate as per international standards. With the World class facilities, experienced manpower and competent processes; it has maintained its high calibration standards and valid trace-ability. Rich experience of design and application of electricity metering systems helps with calibrating and testing of energy meters. Also one extra benefit added with their mobile laboratory, MobiLAB, all measurements as per Indian and IEC specifications and are traceable to national standards maintained by NPL, India. They offer full type testing of electricity meters and transducers under one roof and part type testing for instrument transformers.
Create your free account