Lab Search. Simplified.
Send your testing and calibration requirement for quick response
Simple
Correct
Trusted
Central Power Research Institute, Bangalore
C.V. Raman Road,Sadashivnagar Sub post office, P.B.No.8066, Bangalore Urban, Karnataka, India, 560080
080-23602457
9448141980
Other Branches:
Central Power Research Institute, HyderabadCentral Power Research Institute , Noida
Central Power Research Institute, Switchgear Testing & Development Station
Also Listed In
Discipline
- A.C. high Voltage
- A.C. High Voltage At Room Temperature
- Ability To Withstand Mechanical Loads Test
- Ability To Withstand Short Circuit & All Routine Tests
- Abrasion Resistance (Scrape Abrasion)
- Abrasion Resistance (Tape Abrasion)
- Accelearated Service Life Test
- Accelerated Life test on HT Capacitors
- Accuracy Test
- Accuracy Requirement Test
- Accuracy Test
- Additional Ageing Test
- Adhesion Force
- Adjustment/ Range Of Adjustment
- Ageing characteristics
- Ageing in air bomb
- Ageing In Air Bomb Test
- Ageing in air bomb/Oxygen Bomb
- Ageing in Air oven
- Ageing In Air Oven Insulation
- Ageing In Air Oven Test
- Ageing Test
- Ageing Test For Screwless-Type terminal Blocks
- Ageing/ Conditioning tests
- Ageing/Conditioning Tests
- Air Delivery Test
- Annealing Test
- Annealing Test (For Copper) Test
- Annealing Test For Copper Conductor
- Appearance
- Application & Construction Of Conductors
- Armour Resistance Test ( Resistivity)
- Armour Resistivity Test
- Armur Resistivity Test
- Ash Testing
- Assembled core load time test
- Assembly Torque Test
- Axial & Radial Run Out Test/ Eccentricity Test
- Back To Back Capacitor Bank Current Switching Tests
- Ball Pressure Test
- Basic Short Circuit Test
- Battery Fluid Resistance
- Bend Testing
- Bending test
- Braid/Screen/Separator/Armouring Wire
- Breaking Capacity Tests
- Breaking Load for Aluminium Conductor
- Breaking load test
- Breaking Load/UTS test
- Breaking Strength Test
- Bunched Cable Test
- Bunched Cable Test
- Burning resistance
- By Pass Ct/Shorting Detection
- Cantilever Failing load
- Cantilever Load Withstand Test
- Cantilever strength test
- Cantilever test
- Capacitance & Tan Delta Measurement
- Capacitance Measrement
- Capacitance Measurement
- Capacitance Measurement Test
- Capacitance Mesaurement
- Capacity Rating Test
- Carbon Hydrogen Testing
- Charpy Impact strength
- Circuit Integrity Test Under Fire Condition
- Clamp Bolt Torque Test
- Clamp Slip Test
- Clearance & Creepage Distance
- Clearance And Creepage Distances Test
- Cold bend and cold impact
- Cold Bend Test
- Cold Bend, Cold Impact Test
- Cold Duty
- Cold Impact Test
- Cold Impact Test / Cold Bend Test
- Cold Impact test /Cold Bend Test
- Cold Impact Test/ Cold Bend Test
- Cold Impact Test/Cold Bend
- Cold Test
- Communication Capability
- Composite Error Measurement Test
- Composite Temperature And Humidity Test
- Compression & Pull off Test
- Compression Test
- Conditioning Test
- Conditioning tests
- Conditioning Tests On Electrical Equipment
- Conductivity Test
- Conductor Resistance
- Conductor Resistance Test
- Conventional non fusing current
- Conventional non-fusing current
- Conventional Non-Fusing Current Test
- Cord Grip Test
- Core Identification
- Cores, Covering, Colour
- Corona Inception Extinction Test
- Corona Inception Test & Extinction Voltage Test
- Corona inception/Extinction
- Corrosive Sulphur
- Creepage Distance And Clearances Test
- Ct Polarity Reversal/ Current Reversal Detection
- Current error & phase displacement
- Cut off current characteristics
- Cut-off current characteristics
- Cut-Off Current Characteristics* * Test
- Damage limit proof test
- Damp Heat (Cyclic) Test
- Damp Heat (Steady State) Test
- Damp Heat cyclic
- Damp Heat Cyclic Test
- Damp Heat steady state
- Damp Heat Test
- Damper Efficiency test
- DC Withstand
- DC withstand Test
- Degree of protection
- Degree of protection of enclosed equipment
- Degree Of Protection Test
- Density
- Destruction Test On Capacitors
- Determination Of Errors Associated Current
- Determination of Temperature co-efficient for capacitance
- Determination Of Temperature Co-Efficient For Tan Delta
- Determination of Temperature co-efficient for Tandelta
- Determination of Temperature co-efficient of Capacitance
- Determining Errors And Variations Relating To The Specified Time
- Determining The Errors And Variation Relating To The Characteristics Quantity
- Determining The Variation Relating To The Specified Time
- Dielectric Dissipation Factor
- Dielectric Power Factor As A Function Of Voltages & As A Function Of Temperature Test
- Dielectric Properties Test
- Dielectric Strength
- Dielectric Strength Test
- Dielectric Test
- Dielectric Tests
- Dielectric- Properties
- Dielectric-Properties
- Dimension for armouring material
- Dimension for Armouring Material
- Dimension of Armour Material
- Dimensional Measurements
- Dimensions
- Dimensions Of Armour Material
- Direct Test Facility
- Discharge resistor test
- Discharge Current Test
- Discharge Lamp circuits
- Discharge resistor test
- Discharge Test
- Discharge test fused capability tests for internally fused capacitors
- Discharge test of/on Internal fuses
- Discharge test of/on/for Internal Fuses
- Discharge Test On Internal Fuses
- Disconnecting Test On Internal Fuses
- Dissolved Gas Analysis
- Drainage Test
- Dripping Test
- Drop Out
- Dry Heat
- Dry Heat Test
- Dry Power Frequency Voltage Withstand Test
- Dry/Wet Power Frequency Voltage Withstand Test
- Duties And Short Line Fault Tests
- Dye Penetration test
- Dynamic Characteristics Test
- Earthing Connection Test
- Earthing Connections Test
- Effect Of Influencing Quantities On The Current
- Effects Of Correcting Quantities On The Current
- Efficacy discharge device test on Capacitors
- Electric Strength
- Electrical & Mechanical endurance
- Electrical & Mechanical Endurance Test
- Electrical Durability
- Electrical Heat Cycle Test
- Electromehanical All Or Nothing Relays
- Elongation On Insulation & Sheath
- Elongation Test
- Endurance test
- Failing Load Testing
- Fan Speed & Input Test
- Fan Speed And Input Test
- Fast Transient Impulse Voltage Test
- Fatigue/ Vibration
- Fatigue/ Vibration Tesst
- Ferro Resonance
- Fire resistance
- Fire Resistance Test
- Fire Resistance, Swedish Chimney Test, Bunched Cable Test,
- Fixed Carbon Testing
- Flame retardance test for Bunched cable
- Flame retardance test for Bunched Cables
- Flame Retardance Test For Single Cable
- Flame Retardance Test On Bunched Cable
- Flammability
- Flammability Test (Flame Retardence ) For Bunched Cables.
- Flammability Test
- Flash Point
- Flexibility test
- Flexibility test
- Flexion Test
- Freedom From Defects
- Freedom from season cracking
- Freedom From Season Cracking Test
- Front of Wave Spark over
- Functional Relays
- Furan Analysis
- Fuse capability tests for internally fused capacitors
- Galvanising Test (Uniformity of Zinc coating & Mass of Zinc Coating)
- Galvanising Test
- Galvanising test (Uniformity of zinc coating & Mass of Zinc coating )
- Galvanising test (Uniformity of Zinc coating & Mass of Zinc coating)
- Galvanising Test (Unifromity of Zinc coating & Mass of Zinc coating)
- Galvanizing Coating
- Galvanizing Test
- General & Constructional Requirement
- Glow rate
- Glow wire flammability test
- Gross Calorific Value Testing
- Halogen Acid Gas Evolution Test
- Halogen Acid Test
- Hammer Test
- Harmonic Restraint Characteristics Or Harmonic Restraint
- Heat Cycle Test
- Heat Resistance/Thermal Overload
- Heat Shock Test
- Heat Shock Test For LT Joints
- Heating Cycle Test
- Heating Test on capacitors
- Heating Tests Capacitors
- Heating Tests on Capacitors
- High Voltage Power Frequency Test
- High Voltage Test
- High Voltage Test (Water Immersion AC Test)
- High Voltage Test (Water Immersion DC Test)
- High Voltage Test/Electric Strength Test
- HO Deformation Test
- Hot Deformation Test
- Hot Set Test
- Hot Set Test For Insulation
- Impact Test
- Impact Test At Ambient Temperature
- Impulse flashover
- Impulse Voltage Test
- Impulse Voltage Withstand Test
- Impulse With Stand Test
- Impulse Withstand
- Impulse Withstand Test
- Independence Of Adjustment
- Induced current switching test
- Ingress Protection Test
- Inner & Outer Sheath
- Instrument Security Factor
- Insulating properties
- Insulating Properties
- Insulating Properties Test
- insulation Resistance Constant
- Insulation Resistance Test
- Insulation Resistance Test/Volume Resistivity Test
- Interfacial Tension
- IR Constant
- IR Constant Test
- Kinematic Viscosity
- Knee Point Voltage And Excitation Current Measurements Testing
- Leak Test
- Leakage Current Test
- Leakage test
- Lifting, Marking, Mechanical Impact Test
- Lightning Impulse spark over
- Lightning Impulse Test
- Lightning Impulse Voltage Test On Arrester Housing (Dry)
- Lightning Impulse Voltage Withstand Test
- Lightning Impulse Voltage Withstand Test (Dry)
- Lightning impulse voltages withstand test
- Lightning Impulse VoltageWithstand Test
- Lightning Impulse Withstand Test (Dry)
- Lightning Voltage withstand test between terminals and Container
- Line Cable Charging Current Switching Tests
- Load Cycle Test
- Log Decrement Test
- Loss of Mass
- Loss Of Mass In Air Oven
- Loss Of Mass Test
- Loss Of Mass Test, Breaking Strength Test
- Low Temperature Resistance
- LV Switchgear And Controlgear: Part1 General Rules
- Making & Breaking Capacity Test
- Making and breaking capacities
- Marking and breaking capacities
- Marking Durability Test
- Marking Of Meters
- Mass Of Zinc Coating
- Mass Of Zinc Coating Resistivity & Conductance Test Of Armour (Wires/Strips)
- Material Used In The Dial
- Maximum Demand Integration Period (DIP)
- Maximum Operating Conditions Test
- MD Reset
- Measurement Of Accuracy Of Specified Time Under Reference Condition
- Measurement Of Insulation Resistance
- Mechanical bending test
- Mechanical Endurance (For Regulators Only) Test
- Mechanical endurance test ( for regulator only)
- Mechanical Failing Load
- Mechanical Failing Load Test
- Mechanical Failing load Test
- Mechanical Failing Load Test (Tensile)
- Mechanical Failing Load Testing
- Mechanical load test
- Mechanical Operation Test at Ambient Air Temperature
- Mechanical Performance test
- Mechanical Strength
- Mechanical Strength (For Regulators Only) Test
- Mechanical Strength Test
- Mechanical Test
- Mechanical test on motor/fan/Lighting Capatitors
- Mechanical Tests
- Mechanical tests on Motor/Fan/Lighting Capacitors
- Mechnical endurance test
- Meter Shall Indicate Load Unbalance Over & Above 25% Between The Phases For Loads Above 10%
- Meter Shall Record Occurrence & Restoration Condition Of Abnormal Magnetic Field In The Vicinity
- Mineral Immersion Test
- Mineral Oil Immersion Test
- Missing Neutral Detection
- Missing Potential Detection
- Moisture Resistance (For Regulators Only) Test
- Moisture Resistance Test
- Moisture Testing
- Movement Test
- Neutralisation Value
- Non-deterioration of contacts
- Non-Deterioration Of Insulating Parts Of Fuse Links, Fuse Base And Contacts Test
- Non-deterioration of ontacts
- Non-Specified Time Or Independent Specified Time Measuring Relays
- OCRT
- Oil leakage test
- Oil/Fluid Resistance
- Operating Characteristics
- Operating Limits
- Operating Time
- Operating Time Charcteristics
- Operating Time For Determining Errors
- Operating Time Test
- Operating Value Time
- Operational performance
- Oscillatory Wave Immunity Test/Ring Wave Test
- Out-Of-Phase Making & Breaking Capacity Test
- Over Cycling Test On HT Capacitors
- Over Voltage Cycling Test on HT Capacitors
- Over Voltage Interturn Test
- Overall Dimensions Of Insulation And Sheath
- Oxidation Stability
- Oxygen Index Test
- Oxygen Index Test & Temperature Index Test
- Partial Discharge Test
- Performance under short circuit conditions
- Permanent Set Test
- Permittivity & Dissipation Factor
- Phase Sequence Reversal Detection
- Physical Test For Insulation- Hot Set Test, Shrinkage Test, Water Absorption Test
- Physical Test On Insulation & Sheath
- Physical Test On Insulation & Sheath- Ageing In Air Oven, Shrinkage Test, Hot Deformation Test, Heat Shock Test, Thermal Stability Test, Loss Of Mass In Air Oven, Water Absorption Test, Insulation Res
- Pick Up
- Pollution Performance
- Porosity test
- Porosity test (on porcelian insulators)
- Pour Point
- Power acceptance
- Power Acceptance Test
- Power Arc Test
- Power Arc Tests
- Power Consumption Test for cooling
- Power Frequency Flashover (Dry & Wet)
- Power Frequency Flashover (Dry & Wet))
- Power Frequency puncture withstand voltage
- Power Frequency Voltage Test
- Power frequency voltage withstand test (Dry/Wet)
- Power frequency voltage withstand test (Wet/Dry)
- Power Frequency Withstand
- Power frequency withstand (Dry & Wet )
- Power frequency withstand (Dry & Wet)
- Power Frequency Withstand Test
- Presence of Oxidation Inhibitor
- Pressure Relief tests
- Pressure Test At High Temperature
- Pressure test at high temprature
- Properties Of Insulating Materials Test
- Protection Against Electric Shock (For Regulators) Test
- Protection against electric shock and integrity of protective circuits
- Protection Against Electric Shock Test
- Prototype Tests
- Pull down Test
- Pull-Out Test
- Radio Interference Voltage (Dry & Wet)
- Radio Interference Voltage Test
- Radio Interference Voltage Test (Dry/Wet)
- Rated current time characteristics
- Rated Current Time Characteristics Test
- Rated Gross and Storage Volume
- Reactive Output Test On Capacitors
- Recording Power On Time Since The Last Reset
- Relay Characteristics And Performance
- Repeat Accuracy Test
- Reset Time Test Impedance Measuring Relays
- Reset Value Test
- Resetting Characteristics
- Resetting Time
- Residual Strength (Tensile)
- Resistance
- Resistance And Resistivity
- Resistance Test
- Resistance to Corrosion
- Resistance To Corrosion Test
- Resistance to heat
- Resistance to heat & fire
- Resistance To Heat Test
- Resistance to rusting
- Resistance To Rusting Test
- Resistance to Ultra-Violet (UV), Radiation, Flexural Strength
- Riv Test
- RM
- Roboustness of termination
- Robustness of termination
- Routine & Sampling test
- Routine & Sampling tests
- Routine and type tests
- Running At Low Load
- Sealing Test
- Secondary Winding Resistance Measurement Test
- Sediment
- Self Healing Test on LT Capacitors
- Self Healing Test on LT Capacitors
- Setting Accuracy Test
- Short circuit breaking capacity
- Short Circuit Breaking Capacity Test
- Short Circuit Capacity Test
- Short Circuit Discharge Test
- Short circuit making & breaking capacity
- Short Circuit Making & Breaking Capacity Test
- Short Circuit Making Test
- Short circuit withstand capability test
- Short time current test
- Short time over voltage test between terminal to terminal and terminal to case
- Short time over voltage test between terminal to terminal to case
- Short Time Withstand Current Test
- Short-Time Current Test
- Shrinkage
- Shrinkage Test
- Single Capacitor Bank Current Switching Tests
- Slip Strength & Mechanical Strength Test
- Slip Strength/ Mechanical Strength etc
- Sludge Content
- Small Inductive Current Switching Tests
- Smoke Density
- Smoke Density Test
- Soldering test
- Specific Resistance
- Spring Hammer Test/Mechanical Test Of Meter Case
- Starting Input And Current Test
- Starting Test
- Steep Front Impulse Flash Over
- Stress- strain test
- Sulphur Testing
- Surge Immunity Test
- Suspension System (For Regulators Only) Test
- Sustained Accuracy Test
- Swedish Chimney Test
- Swedish Chimney Test Bunched Cable Test
- Switching Impulse Test
- Switching Impulse Voltage Withstand Test (Dry/Wet)
- Synthetic Test Facility
- Tamper & Fraud Monitoring Features
- Tan Delta As A Function Of Temperature
- Tan Delta As A Function Of Voltage
- Tan Delta Measurement
- Tan Delta Measurement Test
- Tape Insulation
- Tear resistance test
- Tear Resistance Test
- Temp.Rise Test
- Temperature cycle
- Temperature Index Test
- Temperature rise
- Temperature rise test
- Temperature test
- Temporary deflection
- Tensile
- Tensile Except Rp,Rt & Agt
- Tensile Load Test
- Tensile Strength
- Tensile Strength & Elongation
- Tensile Strength & Elongation At Break
- Tensile Strength & Elongation At Break Test
- Tensile Strength For Aluminium Conductor
- Tensile Strength For Copper Conductor
- Tensile Test
- Tensile Test (For Aluminum)
- Tensile Test On Insulation & Sheath
- Test For Accuracy Testing
- Test For Determining Relay Characteristics, Performance And Accuracy
- Test For Determining The Dynamic Characteristics & Operating Times
- Test For Halogen Acid Gas Evolution
- Test For Internal Discharge Device
- Test For Overall Dimensions And Thickness Of Insulation And Sheath Test
- Test for resistance to Cracking
- Test of Discharge device
- Test Of Internal Discharge Device
- Test Of Mechanical Strength Of Clamping Units
- Test Of Resistance To Heat And Fire
- Test Of The Effect Of Climatic Environments
- Test of/on/for Internal Discharge device
- Test On Armouring Wire & Strips
- Test On Conductor- Annealing Test, Tensile Test, Conductor Resistance Test, Wrapping Test
- Test On Conductor- Annealing Test, Tensile Test, Wrapping Test, Conductor Resistance Test
- Test on Internal discharge device
- Test on/of/for Internal discharge device
- Tested Energy consumption
- Testing & Measurement Techniques Surge Immunity Test
- Tests For Resistance To Cracking
- Tests Of Performance With Through Current
- Tests Related To Accuracy And Operating Charactristic
- Thermal Ageing In Air Oven Test
- Thermal And Dynamic Short Time Current Withstand Test
- Thermal Cycling test on Fluorescent & other Discharge Lamp Circuits
- Thermal Cycling Test On Fluorescent & other
- Thermal Cycling Test On Fluorescent & other Discharge Lamp circuits
- Thermal cycling test on Fluorescent & other Discharge Lamp citcuits
- Thermal Stability
- Thermal Stability Test For PVC Material
- Thermal Stability Test On Capacitor
- Thermal Stability test on Capacitors
- Thermo mechanical test
- Thickness And Dimension Test
- Thickness Measurement
- Thickness Of Insulation And Sheath
- Thickness Of Metallic Sheath Test
- Thickness Test
- Thickness Test, Mechanical Test, Tensile Test, Tear Resistance Test
- Time Of Day (Tod) Metering
- Timing Tests
- Torsion Test
- Torsion Test For Round Wires
- torsion test on Galvanized steel wire for armouring
- Toxicity Index Test
- Transformer Off Load Current Breaking Motor Test
- TRT
- TRT, OCRT
- TRT, RM
- Turn Ratio Measurement Test
- Twenty Four Hours Mechanical Strength Test
- Type test on individual wires (except RIV & Corona tests)
- Uniformity Of Zinc Coating
- Verification Of Clearances And Creepage Distance
- Verification of conventional operational performance
- Verification Of Limits Of Operation
- Verification Of Resetting Time
- Verification Of The Voltage Drop
- Vibration Test: Longitudinal & Vertical Vibration Test and Sub-span Oscillation Test
- Visible discharge
- Visible Discharge Test
- Volatile Matter Testing
- Voltage decay test
- Voltage Distribution
- Voltage test between terminal and Container
- Voltage test between terminals and container
- Volume resistivity
- Volume Resistivity Test
- Water Absorption (Gravimetric)
- Water Absorption Test
- Water Absorption Test (Electrical)
- Water Absorption Test (Gravimetric)
- Water Absorption Test On Xlpe (Gravimetric)
- Water Content
- Water diffusion test
- Water Immersion test
- Water Penetration Test
- Weight Per Unit Length Of Cable
- Wet Power Frequency Voltage Withstand Test
- Winding Test
- Winding Test For Formed Wire
- Winding Test On Galvanized Steel Strips For Armouring
- Winding Test On Strip Test
- Wrapping Test
- Wrapping Test (For Aluminum)
- Wrapping Test On Aluminium Conductor
- Wrapping Test On Aluminium Wire
Related Labs
Scope of Accrediation
Products
Accrediation valid upto
31-03-2021
About Central Power Research Institute, Bangalore
Central Power Research Institute, established in 1960, is a homeland for Indian electrical industry. The prudent researches of this institute are in the department of electrical power engineering, electrical industry and assurance of quality products as well as putting forth consultancy services. Its significant contribution is ameliorating planning, operation and control of power systems. Seven laboratories of this firm are scattered all over India.
With its laboratory located in Bangalore, Karnataka, it has a contingent authority for testing specifically electro-testing calibration. This is executed on the instruments to measure their caliber with an explicit standard. The quantities measured are Power factor, frequency, reactive power. This firm’s noteworthy professionals are highly qualified engineers and scientists. They aim to push their excellence crossing all limits and boundaries but not at the expense of their customer’s dissatisfaction.
Create your free account