Measurewel Technologies

Unit No. 6, H-Building Udyog Bharti Estate, C Sector, MIDC Waluj, Aurangabad, Maharashtra, 431136, India


Other Branches:

Scope of Accrediation
S.No. Instrument Name Range (to & from ) CMC (to & from )
1 External Micrometer L.C. 0.001 mm$ 0 mm To 100 mm 1.2 μm
2 External Micrometer L.C. 0.01mm$ 0 mm To 200 mm 3.8 μm
3 Vernier Caliper L.C. 0.01 mmΦ 0 mm To 600 mm 11.0 μm
4 Plunger Dial Gauge L.C. 0.001 mmΦ 0 mm To 25 mm 2.5 μm
5 Dial Gauge (Lever Type) L.C. 0.01 mm$ 0 mm To 1 mm 3.3 μm
6 Dial Gauge (Lever Type) 0.001mm$ 0 mm To 0.1 mm 2.5 μm
7 Dial Indicator L.C. 0.002 mm (Lever Type)$ 0 mm To 0.2 mm 2.6 μm
8 Dial Thickness Gauge L.C. 0.01mm$ 0 mm To 20 mm 7.6 μm
9 Dial Thickness Gauge L.C. 0.001mm$ 0 mm To 10 mm 1.0 μm
10 Bore Gauge (Only for transmission error)$ 0 mm To 1 mm 3.2 μm
NOTE: All Symbols and their description

* : Meaurement Capability is expressed as an uncertainty (±) at a Confidence probability of 95 %

$ : Only in Permanent Laboratory

♣ : Only for Site Calibration

# : The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used

Φ : Laboratory can also Caibrate instruments/devices of coarser resolution/ least count within the accredited range using same reference standard/ master equipment under the scope of accreditation

Accrediation valid upto

About Measurewel Technologies

Since its inception in the year 2007, Measurewel Technologies has been doing an outstanding job at providing professional dimensional inspection, calibration, and engineering services to extensive number of industries like relation gauges and fixtures, plastics, forgings, mould makers, pattern makers, tool and die, precision machining, foundries, medical, and casting. In addition to this, they also offer in-house as well as on-site CMM inspection facility. The services offered by Measurewel Technologies include first article inspection, lot inspection, capability studies, jig/fixture/dies/mould inspection, relation gauges inspection, CAD comparison. Apart from CAD design comparison, they also offer the service of drawing reviews for GD and T, where they highlight the problem areas in your product drawing, as well as report on the validity of the GD and T. Furthermore, they are highly specialized in reverse engineering and 3D modeling too. Measurewel Technologies has been accredited in accordance with the standard ISO/IEC 17025:2005.