Maruti Calibrations

Shop No 6 & 8, Pagaria-Nelge Plaza, Pune Nasik Highway, Bhosari, Pune, Maharashtra, 411039, India

9371151622, 9860103446

Other Branches:

Scope of Accrediation
S.No. Instrument Name Range (to & from ) CMC (to & from )
1 Caliper L.C.10 µmΦ 0 mm To 1000 mm 20.0 μm
2 Height Gauge L.C. 10 µmΦ 0 mm To 1000 mm 20.0 μm
3 Depth Gauge L.C.10 µmΦ 0 mm To 600 mm 16.0 μm
4 External Micrometer L.C. 1 µmΦ 0 mm To 100 mm 2.0 μm
5 External Micrometer L.C. 10 µmΦ 300 mm To 600 mm 10.0 μm
6 Length Bars $ 0 mm To 100 mm 2.3 μm
7 Dial Gauge (Plunger Type) L.C. 0.001 mm$ 0 mm To 25 mm 2.5 μm
8 Dial Gauge (Lever Type) L.C. 1.0 µm$ 0 mm To 0.2 mm 2.5 μm
9 Dial Gauge (Lever Type) L.C. 10.0 µm$ 0 mm To 1.0 mm 5.0 μm
10 Internal Micrometer L.C. 10 µm$ 0 mm To 350 mm 8.1 μm
NOTE: All Symbols and their description

* : Meaurement Capability is expressed as an uncertainty (±) at a Confidence probability of 95 %

$ : Only in Permanent Laboratory

♣ : Only for Site Calibration

# : The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used

Φ : Laboratory can also Caibrate instruments/devices of coarser resolution/ least count within the accredited range using same reference standard/ master equipment under the scope of accreditation

Accrediation valid upto

About Maruti Calibrations

Maruti Calibrations was established in the year 2008 and is located at Pune, Maharashtra. Maruti Calibrations is an individual firm and is involved in providing service and trading of the manufactured products to a large number of customers. It offers Mechanical calibration services for measuring quantities such as Dimension using instruments such as Vernier or Dial or Digital Caliper, Vernier or Dial or Digital Height Gauge, Vernier or Dial or Digital Depth Gauge, External Micrometer, Micrometer Setting Stick or Length Bar or Height Block, Plunger Type Dial Gauges, Lever Dial Gauges, Internal Micrometer, Plain Plug Gauges or Width Gauges, Snap Gauges, Dial Thickness Gauges, Feeler Gauge Set, Bore Gauge for measuring Transmission, Pistol Caliper, Depth Micrometer, Measuring Pin or Thread Measuring Wire, Taper Thread Plug Gauge, Taper Plug Gauge, Dial Snap Gauge, Measuring Steel Scale, Surface Plate, Pressure and Vacuum Gauge, and others. Maruti Calibrations has been accredited with ISO/IEC 17025: 2005 for their Calibration discipline.