Action Engineers

Vadsar Bridge (West End), Near Petrol Pump, Vadodara, Gujarat, 390010, India

0265-6564026

09925844533

actionengrs@hotmail.com

Other Branches:

N/A
Scope of Accrediation
Instruments
S.No. Instrument Name Range (to & from ) CMC (to & from )
1 Caliper L.C.10 µm 0 mm To 1000 mm 11.6 μm
2 Depth Gauge L.C.20 µm 0 mm To 450 mm 15 μm
3 Height Gauge L.C. 10 µm$ 0 mm To 1000 mm 11.1 μm
4 External Micrometer L.C. 1 µm$ 0 mm To 25 mm 0.8 μm
5 Internal Micrometer L.C. 10 µm$ 0 mm To 500 mm 7.8 μm
6 Inside Caliper$ 0 mm To 75 mm 7.3 μm
7 Depth Micrometer L.C. 0.001 mm$ 0 mm To 100 mm 7.5 μm
8 Micrometer Head L.C. 0.001 mm$ 0 mm To 25 mm 1.2 μm
9 Dial Indicator L.C. 0.001 mm (Plunger Type)$ 0 mm To 25 mm 1.2 μm
10 Dial Indicator L.C. 0.01 mm (Plunger Type)$ 0 mm To 50 mm 10 μm
NOTE: All Symbols and their description

* : Meaurement Capability is expressed as an uncertainty (±) at a Confidence probability of 95 %

$ : Only in Permanent Laboratory

♣ : Only for Site Calibration

# : The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used

Φ : Laboratory can also Caibrate instruments/devices of coarser resolution/ least count within the accredited range using same reference standard/ master equipment under the scope of accreditation

Accrediation valid upto
04-12-2017

About Action Engineers

Action Engineers have been into the business of instrument calibration and repair for almost 3 decades. They have been proffering exceptional services in their long span of existence. Their services have earned them prestigious clients such as NTPC, Alstom, Reliance, TATA, L&T, Siemens, Aditya Birla Group and various others. Their state of the art technologically advanced calibration facility is situated in the city of Vadodara in Gujarat. The facility is equipped to undertake calibration services over domains such as electro-technical, mechanical and thermal calibration. Dimensions, acceleration, speed, acoustics, pressure and vacuum and etc are calibrated through mechanical calibration devices. Sources and measures are calibrated through electro-technical devices. Temperature, heat and humidity are calibrated through thermal calibration devices. Since their inception they have been providing superior standard of services. This can be attributed to their technological advancements and committed workforce.