Micro Measures

Gruhalaxmi, Plot No. 49 Behind Hotel Apurvai, Anandvali, Gangapur Road, Nashik, Maharashtra, 422101, India

0253-2020139

09822912963

micromeasures01@gmail.com

Other Branches:

N/A
Scope of Accrediation
Instruments
S.No. Instrument Name Range (to & from ) CMC (to & from )
1 Caliper L.C. 0.005 mm$ 0 mm To 600 mm 11.7 μm
2 Inside Dial Caliper L.C. 0.001 mm$ 0 mm To 150 mm 5.9 μm
3 Height Gauge L.C. 0.0001 mm$ 0 mm To 600 mm 6.8 μm
4 Depth Gauge L.C. 0.010 mm$ 0 mm To 300 mm 8.0 μm
5 External Micrometer L.C. 0.001 mm$ 0 mm To 150 mm 1.8 μm
6 External Micrometer L.C. 0.010 mm$ 0 mm To 200 mm 2.5 μm
7 V-Anvil Microemter$ 0 mm To 100 mm 10.8 μm
8 Micrometer Setting Standard$ 25 mm To 150 mm 1.8 μm
9 Length Bars $ 25 mm To 150 mm 1.8 μm
10 Two Pin Inside Dial Caliper 0.010 mm$ 500 mm To 500 mm 5.7 μm
NOTE: All Symbols and their description

* : Meaurement Capability is expressed as an uncertainty (±) at a Confidence probability of 95 %

$ : Only in Permanent Laboratory

♣ : Only for Site Calibration

# : The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used

Φ : Laboratory can also Caibrate instruments/devices of coarser resolution/ least count within the accredited range using same reference standard/ master equipment under the scope of accreditation

Accrediation valid upto
22-04-2018

About Micro Measures

Micro Measure is rooted in 1999, Micro Measures has been successful in placing itself among the industry leaders in calibration and metrology. The lab focuses on micro metrology and has very precise and modern technology to provide the best results after calibration. Their services have excelled globally with the complete line of power tools and torque measurement systems. The laboratory of Micro Measures is set up in a vast area which holds the best and modern technologies for calibration services. The technicians and engineers working at Micro Measures are well qualified and have immense knowledge of metrology and industry have helped them gain the top spot in industry. Some of the services provided here at Micro Measures are mechanical calibration of caliper, inside dial caliper, height gauge, depth gauge, external micrometer, v-anvil micrometer, micrometer setting standard / length bar, micrometer setting standard / length bar, lever dial gauge, bore gauge etc.