Metrology Laboratory, CMTI

Central Manufacturing Technology Institute Tumkur Road, Bangalore, Karnataka, 560022, India

080-23371516, 080-22188379

pvs@cmti-india.net, niranjan.cmti@nic.in

Other Branches:

N/A
Scope of Accrediation
Instruments
S.No. Instrument Name Range (to & from ) CMC (to & from )
1 Angle Gauge Blocks$ 0 ° To 90 ° 2.1 Sec. of Arc
2 Autocollimator L.C. 0.05 $ 0 Sec. of Arc To 2000 Sec. of Arc 1.0 Sec. of Arc
3 Bevel Protractor L.C. 5 minute 0 ° To 180 ° 2.5 Min. of Arc
4 Bevel Protractor L.C. 1 minute 0 ° To 180 ° 2 μm
5 Bore Gauge with Dial (For Transmission) 0 mm To 300 mm 2 μm
6 Caliper Checker$ 0 mm To 1000 mm 0.8+L/350 μm
7 Check Master$ 0 mm To 1000 mm 0.8+L/350 μm
8 Inside Micro Checker$ 0 mm To 1000 mm 0.8+L/350 μm
9 Clinometer$ 0 ° To 180 ° 25 Sec. of Arc
10 Depth Microchecker$ 0 mm To 300 mm 0.5+L/300 μm
NOTE: All Symbols and their description

* : Meaurement Capability is expressed as an uncertainty (±) at a Confidence probability of 95 %

$ : Only in Permanent Laboratory

♣ : Only for Site Calibration

# : The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used

Φ : Laboratory can also Caibrate instruments/devices of coarser resolution/ least count within the accredited range using same reference standard/ master equipment under the scope of accreditation

Accrediation valid upto
30-08-2018

About Metrology Laboratory, CMTI

Metrology Testing Laboratory which is owned by CMTI has received accreditation by the NABL and it is equipped with modern and cutting edge calibrating technology in closely controlled environmental conditions. This laboratory has been established with the firm vision to bring a reform to the current industry standards of the meteorology equipment in use. The years of industry experience of the Metrology Laboratory has helped it achieve its motive and it has become the market leader. The laboratory is set up in a vast area and has access to the most modern and state-of-the-art technologies and equipment from around the globe. The team of experts at the lab are also well qualified and are abreast of the latest technology reforms taking place around the world. Some of the services provided by the lab are mechanical calibration of angle gauge blocks, angular graticule, autocollimator, bore gauge, bevel protractor, clinometer etc.