M V Consultants

Gat No.110, Flat No. 102,103, Siddhi Vijay, Nanekar Wadi, Nashik Road, A/P- Chakan, Taluka Khed , Pune, Maharashtra, 410501, India



Other Branches:

Scope of Accrediation
S.No. Instrument Name Range (to & from ) CMC (to & from )
1 Caliper L.C. 0.02 mmΦ 0 mm To 600 mm 18 μm
2 Caliper L.C. 0.01mmΦ 0 mm To 300 mm 12 μm
3 Height Gauge L.C. 0.01 mmΦ 0 mm To 300 mm 15 μm
4 External Micrometer L.C. 0.001 mmΦ 0 mm To 150 mm 3.0 μm
5 External Micrometer L.C. 0.01mmΦ 150 mm To 300 mm 10.70 μm
6 Internal Micrometer L.C. 0.001 mmΦ 50 mm To 63 mm 9.0 μm
7 Internal Micrometer L.C. 0.01 mmΦ 50 mm To 300 mm 9.2 μm
8 Depth Gauge L.C. 0.01 mm$ 0 mm To 300 mm 16 μm
9 Dial Gauge (Plunger Type) L.C. 0.001 mmΦ 0 mm To 50 mm 1.5 μm
10 Dial Gauge (Lever Type) L.C. 0.01 mmΦ 0 mm To 1.4 mm 3.5 μm
NOTE: All Symbols and their description

* : Meaurement Capability is expressed as an uncertainty (±) at a Confidence probability of 95 %

$ : Only in Permanent Laboratory

♣ : Only for Site Calibration

# : The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used

Φ : Laboratory can also Caibrate instruments/devices of coarser resolution/ least count within the accredited range using same reference standard/ master equipment under the scope of accreditation

Accrediation valid upto

About M V Consultants

MV Consultants is located in Pune, Maharashtra which was established in the year 2007. It is involved in providing various services related to Quality Management Systems, Environmental Management Systems, Information Security, Occupational Health, Supplier Improvement, Third Party Audits and Third-Party Inspections to various Industries and Organizations. It offers Mechanical Calibration services for measuring quantities using instruments such as Calipers, Height Gauge, External Micrometer, Internal Micrometer, Depth Gauge, Plunger Dial Gauge, Lever Dial Gauge, Bore Gauge, Plain Plug Gauge, OD Master, Thread Measuring Wires, Snap Gauge, Thread Plug Gauge, Thread Ring Gauge, Plain Taper Plug Gauge, Feeler Gauge or Coating Thickness Foils, Length Bar or Micrometer or Height Setting Standard, Pistol Caliper, Dial Thickness Gauge, Measuring Pins, Surface Plate, Depth Micrometer, Profile Projector, and others. MV Consultants has been accredited with ISO/IEC 17025: 2005 by NABL for their Calibration disciplines.