M. S. Metric Instruments

# NHB 8/A, KHB Colony, Hunsur Road, Hootgalli, Mysore, Karnataka, 570018, India




Other Branches:

Scope of Accrediation
S.No. Instrument Name Range (to & from ) CMC (to & from )
1 Caliper L.C. 0.01mmΦ 0 mm To 600 mm -13.7 μm To 13.7 μm
2 Height Gauge L.C. 0.01 mmΦ 0 mm To 600 mm -13.7 μm To 13.7 μm
3 Depth Gauge L.C. 0.01 mmΦ 0 mm To 300 mm -9.5 μm To 9.5 μm
4 External Micrometer L.C. 0.001 mmΦ 0 mm To 150 mm -2.4 μm To 2.4 μm
5 Depth Micrometer L.C. 0.001 mmΦ 0 mm To 300 mm -6.8 μm To 6.8 μm
6 Plunger Dial Gauge L.C. 0.001 mm$ 0 mm To 12.7 mm -1.6 μm To 1.6 μm
7 Dial Gauge (Plunger Type) L.C. 0.01mm$ 0 mm To 25 mm -6.1 μm To 6.1 μm
8 Dial Gauge (Lever Type) 0.001mm$ 0 mm To 1 mm -1.6 μm To 1.6 μm
9 Dial Gauge (Lever Type) L.C. 0.01 mm$ 0 mm To 2 mm -6.0 μm To 6.0 μm
10 Bore Gauge with Dial (For Transmission)$ 0 mm To 3.0 mm -2.6 μm To 2.6 μm
NOTE: All Symbols and their description

* : Meaurement Capability is expressed as an uncertainty (±) at a Confidence probability of 95 %

$ : Only in Permanent Laboratory

♣ : Only for Site Calibration

# : The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used

Φ : Laboratory can also Caibrate instruments/devices of coarser resolution/ least count within the accredited range using same reference standard/ master equipment under the scope of accreditation

Accrediation valid upto

About M. S. Metric Instruments

M. S. Metric Instruments is located in Mysore, Karnataka and is the organization which provides the calibration and testing of different types of instruments or devices of varying ranges and resolutions for a large number of industries and organizations. It offers Mechanical Calibration services for measuring Dimension using instruments such as Vernier or Dial or Digital Calipers, Vernier or Digital Height Gauge, Vernier or Digital Depth Gauge, External Micrometer, Depth Micrometer, Analog or Digital Plunger Dial Gauge, Lever Dial Gauge, Bore Gauge, Snap Gauge, Plain Plug Gauge, Dial Thickness Gauge, Feeler Gauge, Cylindrical Measuring Pin, measuring Pressure using instruments such as Pressure Gauges or Transmitters, Vacuum Gauges, measuring Acceleration and Speed using instruments such as Non – Contact Type Tachometer, and others. M. S. Metric Instruments has been accredited with ISO/IEC 17025: 2005 by NABL in their Calibration disciplines.